#MODEM MANAGER WINDOWS FULL#
#MODEM MANAGER WINDOWS REGISTRATION#

Mobile Subscriber Identification Number (AT+CIMI): 906743222 Signal Strength (AT#SERVINFO): (-86) dBm. Network Operator Name (AT#SERVINFO): AT&T Packet Service Type (AT#PSNT?): Unsolicited result code disabled.

#MODEM MANAGER WINDOWS REGISTRATION#

Network Registration Status (AT+CGREG?): Registered, home network.

#MODEM MANAGER WINDOWS FULL#

Modem Functionality Mode (AT+CFUN?): Mobile full functions with power saving disabled. Modem Firmware Version (AT+CGMR): 17.00.503 Pull tech completed and saved as (modem)]# show tech (modem)]# pull techД¬hecking International Mobile Subscriber Identity Use the pull tech command and subsequently the show tech to view current modem state. To switch carrier networks:ДЇrom Verizon to AT&T: AT#FWSWITCH=0,1 Testing Connectivity If the response is #FWSWITCH: 1, the modem is configured for Verizon. If the response is #FWSWITCH: 0, the modem is configured for AT&T/other network. Open a terminal session with the modem, and run the following command: AT#FWSWITCH?

To check that your modem is configured for the desired network: This section applies to the following parts only: Modems are factory defaulted for AT&T/other, but may be configured by Uplogix prior to shipment. The modem can operate on either Verzion or AT&T/other networks.

MCT-MNA1 and MTD-MNA1 modems use a cellular radio with dual firmware, meaning the device can connect to two different carrier networks (not simultaneously). Configure Carrier (LTE CAT 4 Combo / MNA-1 Modems ONLY) Would you like to reinitialize it? (y/n): yДo you want to commit these changes? (y/n): y This device has already been initialized. Others must be configured with the config init command before the cellular modem can be used. Embedded modems should automatically configure the appropriate carrier settings for most modems. Log into the Local Manager and access the modem resource using the modem command. This article describes the configuration of a Local Manager with a cellular modem.Д«efore following the steps in this guide, ensure you have already completed Getting Started with Cellular Modems.

Modem manager windows